Technical presentation of Ignitability equipment
This test determines the ignitability of PV modules by direct small flame impingement under zero impressed irradiance by external heat sources using vertically oriented test specimens. The test does not replace a fire test; it assesses ignitability, not flammability of outer surfaces of a module. The test method is based on ISO 11925-2.
The equipment confirm to IEC 61730:2016 (Part 1&2, MST24) and referenced by ISO 11925-2 standards.
The system constructed with Main equipment, Fuel supply, Gas room, Exhaust, Over burner, Control system and Room.