Meet the hot spot test requirements specified in the 39 clause of UL1703 standard.l The entire test process is controlled by IPC.l irradiance could be adjust to ensure the stable current ou
-
Hot Spot Tester(UL)
-
Module Breakage Tester
Meet the module breakage tester requirement in the MST32 clause of IEC61730 standard.l Catching or releasing impactor bag could be controlled.l Including protective nets on both sides t
-
Impulse Voltage Tester
Meet the impulse voltage test requirements specified in the MST14 clause of IEC61215-2:2016 standard.l Provide impulse voltage.l Positive and negative conversion.l Oscilloscope monitor v
-
Continuity tester of equipotential bonding
Meets the ground continuity test requirements specified in the MST13 clause of the IEC 61730-2:2016 standard.l Offer current through frame of the module.l Four wire test method, voltage could be
-
Cut Susceptibility Tester
Meet the cut susceptibility test requirement specified in MST12 clause of the IEC 61730-2:2016 standard.l Operation table made of aluminum alloy material.l Constant speed traction is adopted by
-
Outdoor PID Tester
Test the PID of solar modules under actual outdoor conditions, and the power supply part meets the PID test requirement specified in the IEC62804 standard.l The grounding of the modules frame en
-
Hail Tester
Meet the hail test requirements specified in 4.17 clause of IEC 61215-2016.l Ice ball launcher can be moved.l Ice bal vertical launching.l Ice ball speed can be monitored by infrared speedome
-
Fluorescent (UV) Chamber
Meet the UV preconditioning test requirements specified in the 4.10 clause of the IEC 61215-2016 standard and the standard MST54 of the IEC 61730-2016 standard. Specially designed UV metal h
-
Hot Spot Auto Selector
Fully automatic hot spot cells selector meet the hot spot test requirements specified in 4.9 clause of the IEC 61215-2016 standard. l 3A light could be used to make the module generate cur
-
Dynamic Mechanical Load Tester (Cylinder Type)
Meets the static mechanical test requirements in the 4.16(MQT16) clause of the IEC 61215-2016 standard. Also, meet the IEC TS 62872-2016 standard.l The cylinder drives the vacuum suction cup to pre
-
Visual Inspection Testing
Meet the requirements for visual inspection of solar modules specified in 4.1(MQT01) clause of IEC 61215-2016 and MST01 in IEC 61730-2016.l This equipment is used for visual inspection of photovolt
-
Technical presentation of Fire test
Fire resistance requirements for a PV module intended for building applications are defined in local or national building codes. PV modules as building product – i.e. serving as roof covering materia
-
Technical presentation of Ignitability equipment
This test determines the ignitability of PV modules by direct small flame impingement under zero impressed irradiance by external heat sources using vertically oriented test specimens. The test does n
-
Ammonia corrosion test chamber
The ammonia chamber applies ammonia gas to accelerate the corrosion of materials or products under certain temperature environment, so as to reproduce the damage degree of materials or products within
-
Sand test Chamber
The sand test chamber is driven by a high-power fan to blow a certain concentration of sand dust over the surface of the test samples at a certain flow rate, so as to evaluate the ability of these tes